Xenit Plus with Mini 3 engine

We have noted a problem in the Bing carburetor of the Mini 3 engine.

For this reason, we advice to update the old system to a new one (see photo)

The Xenit Plus with Mini 3 engine

We have noted that sometimes the spark plug cap discharge. For this reason, we added a secure plate. We advice this updating.

FLY PRODUCTS recommends the use of a unleaded automotive gasoline of 92 octane or higher, and the use of semi-synthetic 2-cycle oil. If it's possible use the Motul 510 oil (as the lateral photo), since we test always this machine with this type of oil. Anyway, we recomend a mix fresh gas and oil before each flying session.

Store your fuel/oil mixture in an approved, sealed container.

The recommended fuel/oil ratio is 3%.during the break-in and the 2,5% after at least 20 hours of use. Be sure to agitate the mixture to completely dissolve the oil.